ASOG.net - Questions about 3.0 swap

Questions about 3.0 swap

	Welcome, Guest. Please login or register. Did you miss your activation email? December 02, 2008, 08:31:27 AM

News: ASOG Store is Back! Get your t-shirts, coffee mugs and more at our ASOG Store.

ASOG Forums

Tech Forums

6 Cylinder Tech

Questions about 3.0 swap

« previous next »

Pages: [1]

Author

Topic: Questions about 3.0 swap (Read 382 times)

Spectre

Full Member

Karma: 3
Posts: 154

Watch your rearview

Questions about 3.0 swap

« on: March 14, 2006, 03:57:09 AM »

I looked here, on exile's site, and on the other a/s site and have a few questions about the 6g72 swap.

No pumps or accesories from the 2.5 go onto the 3.0, right?

I'm confused about the injectors. I should use the 3.0 injectors but then I need to swap the lower manifold and splice the harnesses unless I get injectors off the Stealth. Then I just need to swap the lower manifold and fuel rail from my motor?

The basic procedure is: pull old motor, swap and/or modify parts mentioned on ert's site, then drop in new motor. Right?

I assume there's lots of bolts, hoses, and wiring harnesses to disconnect before pulling the motor. Any tips on how to get to them all?

I'm sure I'll have more questions later.

Thanks.


	Logged

Burn504

Member

Karma: 362
Posts: 96

Karma whore

Re: Questions about 3.0 swap

« Reply #1 on: March 14, 2006, 05:02:25 AM »

you use ALL the parts from the 2.5 except the injectors and the lower manifold...

basically buy the new engine(3.0).. strip it down to just block and heads..

take your 2.5 out and make the 3.0 look exactly like the 2.5 that came out...

only use the injectors and lower intake manifold that came with the new engine

put it back in and walla


	Logged

3.1L supercharged