My car- 96 dodge avenger, 2.0L

So heres my dilema, 1200$ to rebuild my auto transmision, or ~400$ to swap a manual into my car. I think i know which one im going to do. I've already obtained a manual trans(nvt-350?), shifter, clutch cable, and clutch pedal for 200$. I have on order a knew flywheel, clutch, pressure plate, and throw out bearing. Now i know for a fact that im going to need a differant mount on the trans side. Which mount do i need to obtain and from where? I DONT know if i need differant axles, if i do, which ones and where. Help is much appriciate guys. Thanks in advance.

You'll also need:
Clutch master cylinder
Clutch slave cylinder
Clutch hose (master to slave cylinder hose)

Looks like the axles are the same for the auto as the for the manual.

Really. Cause The Clutch for the Avenger Platform if Hydraulic. I dont know if it makes a diff

He pry has a transmission out of the older neon's.

they made Lever Type NVT-350's? lol

yeah and you could even find them in some Cavalier and Sunfire with a GM bellhousing

and there is a urban myth about a mysterious one out there with a 4.10 ratio under the south american sun

Alain