u already checked the fuses correct? if so, next step would be to get a voltage tester, and test various parts of the wiring for voltage from the battery toward the fogs/signals. wiring diagram wouldnt be a bad idea, so if u have a manual u can know where to trace. good luck.

evry one of ur electrical components have fuses, this is to prevent fire in case of voltage overload. u can check the relays

just to make sure ,u checked to see if the bulbs were blown by switching them right?

since one side is working, it definitely seems to be a shortI would cut the wires to the fog and turn signals and re route with new wires.

you could always use the power wire trick. i don't think that it'll harm the terminal.

The wires were pinched and torn some how. So i rerouted some new ones. Thnz JBi for u help.