|
|
|
Bad Venge
|
Factory tweets are 3" so obviously you'd have to do some work to adapt those into the factory openings either an adapter plate or get a set of factory blanks(for non tweeter equiped cars and drill those to fit ...
OR you can read my other post and order a set of Bose 301/501/601 tweets from ebay they are 3" Exact fit just pop out and drop in
|
|
|
|
|
Logged
|
|
|
|
|
|
|
|
|
97avengerguy
|
How good r those. Ive always like bose but how good will they sound in the car.
|
|
|
|
|
Logged
|
|
|
|
|
Bad Venge
|
They sound far better then stock ...
|
|
|
|
|
Logged
|
|
|
|
|
|
|
Bad Venge
|
Yup direct fit ...use the sticky rubber from the stockers and the capacitor across the terminals and observe proper polarity
|
|
|
|
|
Logged
|
|
|
|
Daes
Full Member
Karma: 7
Posts: 136
|
Better than stock infinity as well?
|
|
|
|
|
Logged
|
|
|
|
|
|
|
Bad Venge
|
 |
Re: Tweeters
« Reply #10 on: January 26, 2008, 04:15:34 PM » |
|
Better than stock infinity as well?
YES |
|
|
|
|
Logged
|
|
|
|
|
|
Daes
Full Member
Karma: 7
Posts: 136
|
|
Re: Tweeters
« Reply #12 on: February 24, 2008, 09:44:42 AM » |
|
I ordered a pair as well. My stock tweets are Infinity. Therefore, they don't have the little bass blocker on them.
Would it be alright to just run these off of the crossovers I have for my component set? Have the component tweeters and the Bose dash speakers running off of the same set of terminals?
|
|
|
|
|
Logged
|
|
|
|
|
Bad Venge
|
|
Re: Tweeters
« Reply #13 on: February 24, 2008, 04:51:38 PM » |
|
If you are running it off the stock infinity amp it has a crossover built into the amp ...
|
|
|
|
|
Logged
|
|
|
|
Daes
Full Member
Karma: 7
Posts: 136
|
|
Re: Tweeters
« Reply #14 on: February 24, 2008, 07:27:06 PM » |
|
I don't have the Infinity system. I bought these Infinity tweets because they were black to fill the holes when I replaced my dash with a black one.
I'm powering my components and rear deck speakers with an aftermarket 4-ch amp.
|
|
|
|
|
Logged
|
|
|
|
|
Author
