Neon Block????
Pages: [1 ] 2
Topic: Neon Block???? (Read 468 times)
Ballinboy2318
Newbie
Karma: 0
Posts: 8
What all do i have to do to use a 420a block from a neon on the head off of my avenger?
? Need to know as soon as possible thanks
Darktengu
Global Moderator
Hero Member
Karma: 62
Posts: 1807
Criminals survive because society is fearful
Um take the block out of the neon and the head off your avenger......
As far as I know you don't need to do anything special.
titan-racing.com
Medialocker.org
Mod List. Um WAY too many to fit on here. But the engine can handle about 800HP
Nykon
yup, as long as it is the 420A Block you are good to go.
"Hey dumbass! Just because they are next to you on the freeway does not mean they are racing you" -Nykon
www.dsmpurity.com
Shaggers
Newbie
Karma: 1
Posts: 33
I thought I remembered seeing somewhere that they won't interchange. Aren't the heads on the Neon backwards compared to an Avenger, the exhaust comes out the back instead of the front?
Darktengu
Global Moderator
Hero Member
Karma: 62
Posts: 1807
Criminals survive because society is fearful
The head is on backwards, so you can't use that. But the block is the same.
titan-racing.com
Medialocker.org
Mod List. Um WAY too many to fit on here. But the engine can handle about 800HP
Shaggers
Newbie
Karma: 1
Posts: 33
Ahhh, I knew something was backwards with those Neons.
CJ Draper
Newbie
Karma: 0
Posts: 8
As long as it's a 420a block with your head your good to go... and yeah, backwards is one way of describing a Neon
ken
Full Member
Karma: -4
Posts: 233
a 420a is a 420a man, sebring, avenger, eclipse, talon, or the bass ackwards neon (peon) same motor, same parts.
Shiano
only the block. a '78 350 is not the same as a '95 350
ben johnson
Newbie
Karma: 0
Posts: 1
I've always wondered about the sohc neon 420a will it work? Just curious.
Nykon
Please refer to the rest of the thread that you apparently neglected to read...
a 420a is a 420a man, sebring, avenger, eclipse, talon, or the bass ackwards neon (peon) same motor, same parts.
As long as it's a 420a block with your head your good to go... and yeah, backwards is one way of describing a Neon
The head is on backwards, so you can't use that. But the block is the same.
yup, as long as it is the 420A Block you are good to go.
FYI
"Hey dumbass! Just because they are next to you on the freeway does not mean they are racing you" -Nykon
www.dsmpurity.com
Shiano
And the votes are in..............
Rob
Newbie
Karma: 0
Posts: 45
Okay, just to be sure, does this mean that aftermarket hi-compression pistons for a Neon will fit the Avenger too? I'm like 99% sure they will, but don't want to buy a set and find out some piddly little thing won't let me use them
SOHC and DOHC pistons interchange too or no?
« Last Edit: September 10, 2007, 08:34:52 PM by Rob »
Dropping a boosted '96 420A in an '87 GLHS
Shiano
ok. the pistons I would be iffy about. In order for a piston to do it's job [compressing the fuel/air mixture inside the cylinder], it must have a cylinder head attached to the block. Since the heads for a neon NEVER should be used on an Avenger or Eclipse, I wouldn't.
Rob
Newbie
Karma: 0
Posts: 45
Yeah makes sense, I was thinking that the valve reliefs would be a bit different, since the intake and exhaust valves are reversed.
Dropping a boosted '96 420A in an '87 GLHS
Pages: [1 ] 2
Author
? Need to know as soon as possible thanks
Logged
SOHC and DOHC pistons interchange too or no?
