|
Antony
|
im having trouble getting the head lights out is there a certain reason why or am i just an idiot
|
|
|
|
|
Logged
|
 -->  |
|
|
Patrick
Member
Karma: 2
Posts: 76
Alright so a nun walks into a bar...
|
No your no Idiot , IT JUST SUCKS trying to get out. Took me forever ( 30mins ) There is like 3 screws you have to take out. Then it is just you wiggling it out. I used a flat head screw driver to put under the light above the fender. There is a little lip under the headlight that is what makes it so difficult. I have knowen people thought to losen the fuse box and try to wiggle it out that way. Best of luck.
|
|
|
|
|
Logged
|
Yipe Kia MotherF***ER
|
|
|
|
Ivan
|
DO NOT TOUCH the fuse box or its cover! again, DO NOT.
The 1st time i got my head lights out, i removed the fuse box cover... and when i was removing 3rd bolt inside the fender, i touched the exposed fuse box. Guess the consiquence?
Yup, boom! Sparks flew, and my craftman wrench got kinda melted to the fuse box :-/
But yeah, u have to kinda wigle them out, bend the bumper little bit, and just pull! haha, spend some time, you will figure it out.
|
|
|
|
|
Logged
|
 ] |
|
|
Patrick
Member
Karma: 2
Posts: 76
Alright so a nun walks into a bar...
|
I never said take the cover off , I said losen as in unbolt it and move it a little and that in itself is not a smart thing to do.
|
|
|
|
|
Logged
|
Yipe Kia MotherF***ER
|
|
|
|
Antony
|
Well me and my friend were about to take the front bumper off completely but it was really cold outside and snowing on the ground so we just semi-hooked everything back together and figured that we will let it be untill it gets nicer outside
|
|
|
|
|
Logged
|
--> |
|
|
|
Bad Venge
|
You can remove two of the bolts inside the fender and drop the bumper ...
Or remove the three bolts on the fender top and GENTLY pry up on that to work them out
|
|
|
|
|
Logged
|
|
|
|
|
Antony
|
see thats what we tried to do is take off the top 3 bolts but i had to go and i didnt have the time to just sit there and try to pry the head lights out
|
|
|
|
|
Logged
|
--> |
|
|
Patrick
Member
Karma: 2
Posts: 76
Alright so a nun walks into a bar...
|
sounds like me. Working out in the cold  |
|
|
|
|
Logged
|
Yipe Kia MotherF***ER
|
|
|
Gr8witeLxi
Hero Member
Karma: 14
Posts: 801
In <3 with Chrome.
|
I'm taking my headlights out in the cold tomorrow.  I'll let you know how it goes. lol |
|
|
|
|
Logged
|
Scott --> http://www.cardomain.com/ride/2542075 <--  97 Chrysler Sebring Lxi 2.5L V6 - CAI, Accel 8mm wires, CCG UDP, high flow Down pipe/Magnaflow Cat, Neuspeed STB, Megan Racing rear brace. |
|
|
|
Ivan
|
you guys are nuts  yeah i had to take driver's side head light out to fix the ugly yellow fadding (wet sand and clear coats fixed it) ... right head light is still clear like new |
|
|
|
|
Logged
|
] |
|
|
|
Shiano
|
i dropped my bumper when i took mine out. i was rather proud of myself (first body piece i ever took off and it wasn't already broke) when i was able to put it all back on and couldn't tell it had been removed. |
|
|
|
|
Logged
|
|
|
|
Patrick
Member
Karma: 2
Posts: 76
Alright so a nun walks into a bar...
|
Yea I got lucky and did not have to take my bumper off. Think I will next time though cause I am sure it is easier.
|
|
|
|
|
Logged
|
Yipe Kia MotherF***ER
|
|
|
|
JusBringIt
|
u poor souls.....I took my headlights out with only the assistance of.....a wrench...(and only attempting to remove the headlights themselves and not anything else..
|
|
|
|
|
Logged
|
|
|
|
trevor
Newbie
Karma: 0
Posts: 21
|
one of my bolts is stripped so its pretty much impossible to take off my lights..o well
|
|
|
|
|
Logged
|
|
|
|
Gr8witeLxi
Hero Member
Karma: 14
Posts: 801
In <3 with Chrome.
|
one of my bolts is stripped so its pretty much impossible to take off my lights..o well
Crowbar |
|
|
|
|
Logged
|
Scott --> http://www.cardomain.com/ride/2542075 <-- 97 Chrysler Sebring Lxi 2.5L V6 - CAI, Accel 8mm wires, CCG UDP, high flow Down pipe/Magnaflow Cat, Neuspeed STB, Megan Racing rear brace. |
|
|
|
Author
