huh? Last night it didn't work for me now this morning its does. I checked it out and I'm not sure I like it, they never said if it was going to flare out like the tc1 sides. I guess I'll have to wait and see how it turns out. Thanks man.
Ok, I already have a TC1 rear lip but I want a full one piece rear bumper and have been searching for awhile. I had the lip molded to the factory piece but it just flexes to much and eventually cracks. Does any have a one piece rear bumper clip or do they make a one piece? Thanks in advance.
"They bolt up AND plug in just fine ... PROBLEM is the 97+ are a different front shape ... they jut out about 3/4" more towards the center of the car ///"
1000/2000 are both dry systems but like stated before they have MONITORING ... There is no guarentee even with the monitoring ... You will have to add a bigger fuel pump to ensure fuel to the injectors ,Swith to copper plugs (no Plats or Iridiums) I got my 2000 at a deal as the shop ordered it ,and never sold it ... They will require set up as they look for 5 volts WOT and our cars never reach that I've had trouble with it 13+ brains have died on me ... The newer ones will be programable thru the palm pilot they use... NX have crap solenoids they stick OPEN ... Zex= Junk they use a diaphragm system to enrich fuel , also prone to failure and don't even list an application for our cars as the type of fuel system we use NOS= OK in direct port but the dry systems will puddle/pool badly
Guess it's to hard to READ the thread
Well you don't have to be an ass about it, the system he mentioned is a wet kit. And I know its not a good ideal to use a dry kit on a returnless fuel system only continuous systems. So I figured I'd ask.
Ok I have a 2000 dodge avenger and put a body kit on it. I molded the side skirts and it looks great but after about 3 months I see little cracks starting where its molded to the body. How can I keep this from happening again?
Does anyone know where I can get the clear turn signals for a 2000 avenger? I've only found to one up to 96 and when I searched on here I read they won't fit right. That they sit deeper. Any help is really appreciated thanks.
Yes very much thanks . I looked through that speedhut site and I'm thinking about getting them with the reverse glow white face and dark blue font. And I was wanting to have dodge on the tach and racing on the speedo how do I do that? Like the picture you posted.
Ok, I been searching on here and read threads about reverse glow gauges, indiglow gauges. Can some one tell me what the difference betweeen the two, also whats an overlay? What color do they light up?
Show Posts
I checked it out and I'm not sure I like it, they never said if it was going to flare out like the tc1 sides. I guess I'll have to wait and see how it turns out. Thanks man.
