And tell any important people (i.e. bank, creditors, that the stuff is gone. 

Sleeping with a thief.  Okay, so maybe not with...   
I couldn't stop it....

There is a serial number somewhere (it'll be bold, and all serial-ish looking).  You can Google it and probably find what you need.  Or, you could always plug it in the back. 

+ higher octane combusts slower.

 

mmm.

Beautiful.

What a load. 

lol, nissan on the brain?

Good luck, we'll all be waiting for you to come home!

 

The metal bar stools dont look very comfortable.
But I guess they aren't done.

The metal art stuff is frikin sweet though.

The auto is highly unreliable with a stock motor.  If they are using an a543 transmission (??) Then the internals will be much stronger and can even be swapped out for stronger ones, 700hp w/ turbo internals. 

firefox ftw.  I never had a problem.

shot some spuds earlier.  This is one violent s.o.b.

I shot a plastic kiddy baseball bat with a six second hairspray charge.  BOOM!!  Almost ripped the cannon away from me!

Shiano:

5' of 2" pvc
9" of 4" pvc
4" x 4" x 2" coupler w/ 90 degree sweep
4" cleanout w/ threaded cap
2" cleanout w/ threaded cap
4" to 2" reducer
regular old bbq grill igniter
purple primer and heavy duty pvc cement

All pvc is schedule 40 solid core.

Drill the 2" cap out for the igniter. The 2" cleanout will be going into the sweep in the big coupler. Fold the wires up so the spark gap is about in the opening of the sweep in the inside of the pipe. Set the gap how you want, you'll be able to mess with it later too. Glue that igniter down into the 2" cap, and cement the cleanout to the coupler. I wrapped my ingiter in electrical tape as an intentional weak leak to avoid an explosion, instead of glue.   Go ahead and cement the 4" cleanout to whatever side of the big coupler you want to be the rear.  Cement the segment of 4" pipe to the big coupler, and then the reducer to the other side of that. Your chamber is done. Just put the barrel on and voila.  You can cut it off if you want, but you dont need to.  I left mine full length and still get blue flame out the end.  Also, the fumes from the primer and glue will blow up in you face...  They did in mine...

Ether will probably blow this thing sky high, hairspray is plenty.

 

I might be able to help. I have a some American Racing Estrella rims. 16" with tires on them.  Two tires are crap, two are fine.







I only have 3 of the four "dust cap" things you see, but 300 for all four w/tires would be fine by me if you want em.

edit: I prolly should have pm'd this but oh well...

So I decided to build a spud gun. Yes I know, everybody's done it. Just not necessarily like this.

4" by 1'8" chamber funneled down to a 2" by 5' barrel
6'8" total length, and still has blue fire shooting out.  Muzzle flash ftw.
All piping is solid sore schedule 40 pvc, heavy duty cement.

and now,







 

lmao
yeah
 + holy crap thread revival!

Nice car! Enjoy the 6 speed!

Assuming your talking A604, you can get a cork gasket at autozone.