ASOG Forums

1996 Avenger 2.0 5 speed - I recently had a problem with poor idle and stalling and smoking. To fix the previous problem I replaced the PCV and cleaned the throttle body including the IAC. Reassembled everything and the idle was holding at around 2000 RPM.

I found a neon at the wrecking yard with the 420A DOHC motor and purchased the throttle body. I installed that part on my car. I did not connect the throttle cable. Still have the same problem. The neon ran fine it suffered body damage and cracked windshield. The TPS and IAC are the same on the two throttle bodies.

I have also been reading where a few others with the same problem just replaced the IAC with a new one and it didnt help. I am trying to avoid doing this step.

I will check/clean the EGR and look for obvious vacuum leaks. Any other ideas??

Check all your connections along the back of the intake manifold.  Sounds like a small leak.

Problem fixed - I replaced a defective hose connected to the throttle body. This may have been the culprit. I also removed the throttle body and gasket and re-installed everything double checked the connections.

If only I could get some Seafoam over here to clean the intake path and get the rest of the system cleaned internally.

Thanks for all of the help and ideas. I search and read more than I post.


Ray

Glad you've got it all taken care of.

You should be able to have some shipped to you if you would really like it. Even I would be willing to ship you some if customs will allow it.