ASOG Forums

95-00 Sebring/Avenger Downpipes V6
Picture 1 (http://www.aseclub.net/4images/data/media/4204/DP4.jpg)
Picture 2 (http://www.aseclub.net/4images/data/media/4204/DP3.jpg)
Direct Bolt-In
14ga Aluminized Tubing
Comes with new gaskets
Flows much better than a stock one
*Does NOT fit Cali-Spec Cars*

95-00 Sebring/Avenger High Flow Converters
Picture 1 (http://www.aseclub.net/4images/data/media/4204/HFC.jpg)
picture 2 (http://www.aseclub.net/4images/data/media/4204/HFC2.jpg)
Direct Bolt-In
Comes with new gaskets

PRICES
Downpipe Aluminized $210 shipped
Stainless Steel $325 shipped
High Flow Converter $100 shipped

Aluminized downpipe w/ high flow converter $305 shipped
Stainless Steel downpipe w/high flow converter $420 shipped

Please let me know if you have any questions.
Thanks
Scott

Is it comparable to ERT's Predator downpipe cuz I've been looking into one but your price is way better.

I haven't had any complantes before and it's a nice hp gain for the buck.

Scott

estimated hp?

10+ hp gain.

may grab a high flow converter off u maybe next friday. ;D i'll keep u posted

Sounds good. 
Let me know if you have any questions.

Thanks
Scott

I'll get back to you on it. I have a broken driverside door and I'm looking into putting poppers on instead of fixing it, so as soon as I decide what i'm doing i'll get one from you.

how many inches are the inlet/outlet?

2.5" both ways

You said 10 + hp's gain >:( ?
I'd rather get a K&N high flow intake kit and gain about the same for about $140 less!!

To the wheels?   ::)

be my guest...

10hp is a lot...it's from BOTH right??? I wanna get the downpipe...Ialready have a converter other than my stock one that is. How does te downpipe thing work?..like connectionsand stuff and where does it go..what it replaces...cuz the only thing i THINK I know about the downpipe..is it's like an alternate path for exhaust gases.

10hp+ from just the downpipe... ;)

The downpipe replaces your stock downpipe.  Bolts right in place of the stock unit.  It's bolted to the front and rear exhaust manifolds and connects to the converter.

Thanks
Scott

I see..is it possible to have TWO downpipes in the case of a dual exhaust?..or would there be fitting problems?...Could I have it custom made to have two downpipes?

You could...but it would cost you a ton.

I see...alright..well..As soon as I get the money Im looking your way...if I'm up to it.I just might do it a second time since I WILL upgrade to true duals later on. thanks for the info.

just wondering if you shipped my dp and cat yet. if you did email tracking number? thanks.

I would like to purchase a downpipe, my email is evrythingonline@gmail.com, email me so we can get evrything rolling. took me long enough right. ;D

Hey man,

right now I have 2 downpipes to make and ship.  We are waiting on our flex sections to get here.  They should be here today.  I will let you know later tonight on a possible ship date for the downpipe.  Don't want to get your hopes up if the flex sections don't show up today.

Thanks
Scott

Looks like we won't be getting our flex sections in untill Tuesday at the soonest.  Our warehouse is out of stock...and they ordered 4 from another warehouse to ship out tomorrow.

alright..no big deal..would like to get it done asap..so ill jus check bak w/ u on tuesday.

hey,
I'm interested in the down pipe to, i just found out mine is junk.  And it hink it has been rigged so bad i'm not sure what stock is anymore.  I saw on your pic the down pipe looks like it has 4 o2's is this right for an 05 avenger es?  I was told from some one else the 05's have o2's but my car only has 2.  I would be interested in the pipe and cat, so let me know like as soon as you can.  Do you use stainless?

Brad

I'm pretty sure you mean '95 not '05...but '95's have only 1 O2 sensor in the downpipe  (2 all together).  The other one is in the rear exhaust manifold. 

We can make the downpipes out of stainless steel...but the cost is a bit more.  I would have to check on the price for you though.  But I can't tell you a time of shipment right now.  I want to make sure we get these flex sections in on Tuesday...like we were told they were gonna be here.

If you have any other questions, please let me know.
Thanks
Scott

yeah, so i typed that post to fast...95 is right.  At this point i could really use the downpipe, so let me know when you could get another made up.  How much more our we talking about for stainless, and what grade could you get?  So i guess i'm pretty much in for an order, do you take paypal?  By the way thanks for the fast reply.

Brad

Hey guys.

We got the flex sections in just now.

If you want to pay with paypal my address is sroufe7@gmail.com

If you want to send a MO, let me know and I'll give you my address.

Thanks
Scott

PS...I still need to get you your SS price on that downpipe Brad.  I should have it tonight.

sounds good, let me know the price on the ss and then i will paypal you for one or the other, but count me in either way.  Do you know any leadtimes yet?

Brad

Hey Brad, you would be looking at $325 shipped for a SS downpipe out of 409 Stainless.  Right now we don't have any 2.5" SS...and we get our order in on over other Thursday...so you would be looking at over a week and a half before we get the tubing in...since we just got our last order in last Thursday.  We asked if they could ship the tubing...but UPS won't ship it.  We have to buy it in a 10 foot sections.

Let me know.

Thanks
Scott

$325 sounds good.  I'll wait for the stainless so keep me up to date.  I'll send the payment in a couple of days anyway.

Hey you got any pics of your car/motor?  Your discription in your sig sounds pretty cool, have you had it to the track?


Brad

Sounds good man.  If we hear someone is headin towards our Exhaust warehouse...will see if they can pick up the tubing and get it sooner.

http://www.ss-graphics.com/images/Car/Engine/83%20(Medium).JPG (http://www.ss-graphics.com/images/Car/Engine/83%20(Medium).JPG)

I haven't had it out on the streets yet...
I'm kinda lazy...and now that I have this bike...I haven't touched my car...lol

wow that thing looks mean!  Let me know if you get some Et's with it.

Brad

payment sent via paypal.  Let me kow how everything goes for leadtime.  This is the last step in getting this car back on the road, provided i did the timing belt, ditributer, wheel bearings, intake gaskets, valve cover gaskets, SS brake lines, new brakes, pcv, new plugs, new wires, and o2 sensors right......mmmm this could be bad. LOL

Brad

Thank you sir.  I will keep you posted...

Thanks again
Scott

Hey Brad, we got here shipped today for ya.  the tubing came in at about 3 and I made it to UPS with 5 mins to spare...lol

Heres your tracking number:

1Z570X080370021178

Says it should be there on Tuesday.

Please let me know when you get it and how the install goes.

Thanks
Scott

wish I knew about the stainless option sooner  :( but i'm sure they perform identical. keep up the good work everyone should be praising you for giving us this option at such a low cost.

Hey, put the pipe on tonight and man that thing fits like a OEM part.  Bolted right up, no tweaking, stretching, pulling or pushing required.  Good job on the pipe!  I would recommend it to anyone.

I don't know if you got my email or not, but i thought i was getting the high flow cat to?

Brad

Hey Brad, I pm'd you yesturday...maybe you didn't get it.  But I just sent you another.

Thanks
Scott

hey i hate to say this but i still don't have any messages????WTF am i doing wrong?  Under my name it says no messages, and when i click to see my in box it still says zero.

Any way here is my email, i hate to have you send what ever you said the first 2 times but i know that works.  Thanks agian for the great downpipe.  Let me know about that cat, and do you know the inlet and outlet size of it?

Brad

bbieck@yahoo.com