ASOG Forums

Ok, i got this ScanPod, which is suppose to look like a anti theft deterrant light....it gives me 3 wires:

Black: GROUND
RED: (Constant Power)
Yellow: Connection to something that cuts off w/the ignition

Since there is no radio fuse in the fuse box under the dash, can i use the amp relay?

AND which fuse is "constant power"

ANY Help would be greatly appreciated 


-d

try running the red wire into the cigarette lighter fuse and the yellow into the anti-theft, once u've done that sit in the car and lock the doors. it should work once the security light goes off. not sure if ur's is like the one i used to have but it worked for me

Ok, but the problem with that is when i got my REMOTE START installed, the lil "security" light doesn't come on anymore....any other suggestions?

is the alarm still stock?

Yea, it's still stock, but when i tested it out, it didn't work........(roll down the window / open up the door  after 20sec or so)

is the fuse any good? ???

HAH, that's a good question, i'll check it out when i get home from work....b/c as soon as i got home i tried it out, and it didn't work....but i'll definatly check that one out when i get home.............but if that DOESN'T work, is there another one that i could hook it up to?

there's plenty of ways to power it, especially if it comes with the on/off button, just depends on where at in the car you're trying to place it.

Hmm, mine didn't come with an ON/OFF switch...here's the one i have.

(http://images.bestbuy.com/BestBuy_US/images/products/7461/7461196_sa.jpg)

im trying to put it right above my radio...that's really the easiest place to put it

looks like what i had. im gonna pm u on how i did mine  ;D

Aight, cool man

Thanks

Those are pretty neat. Where did you get it?

I got it for $10 at Circuit City...im sure they sell it at Best Buy as well.