|
Title: Front Dashboard Speakers Post by: Russell Clay Jones on October 19, 2006, 05:59:18 PM I recently blew my front dash speakers and need to replace them. I did this 2 years ago with some Kenwood 3.5's but they never fit right and need some better replacements. Some that actually fit like the stock ones or at least don't pop up out of the dash as bad as the kenwoods I had. The ones I bought were 3.5's but they seemed to big (the outer ring on the speaker wouldn't slip into the dash so do they possibly make 3 inch front dash speakers?
Title: Re: Front Dashboard Speakers Post by: Bad Venge on October 20, 2006, 01:15:03 AM the 3" tweeters from bose speakers fit perfect ...get them off of ebay
Title: Re: Front Dashboard Speakers Post by: Shiano on October 20, 2006, 02:10:23 AM awesome bad venge. where were you a year and a half ago when i ripped out my infinitis and threw them across the highway because the previous owner blew them and didn't replace them.
Title: Re: Front Dashboard Speakers Post by: turboavenger98 on December 08, 2006, 05:10:01 AM any tweeter will work i personaly like the 1". they sound the best. all you need to do is make an adapter plate
Title: Re: Front Dashboard Speakers Post by: Shiano on December 08, 2006, 05:17:59 AM yeaaahhhh... sliiiiiight problem.... um....... don't know where to have one made nor do i know how.
Title: Re: Front Dashboard Speakers Post by: sweetbring on December 08, 2006, 08:23:15 AM how do you take them out. I was going to buy some cuz mine are blown, but i don't know how to get them out.
Title: Re: Front Dashboard Speakers Post by: Shiano on December 08, 2006, 09:00:08 AM mine just lifted out. get a butter knife since it doesn't have a sharp edge and try it. you may have to see if they rotate clock or counter.
Title: Re: Front Dashboard Speakers Post by: Bad Venge on December 08, 2006, 05:43:36 PM yeaaahhhh... sliiiiiight problem.... um....... don't know where to have one made nor do i know how. 3" hole saw cut out plexi or wood then cut the size tweet into the middle of that ... use the factory grills over them ... Title: Re: Front Dashboard Speakers Post by: Shiano on December 09, 2006, 03:27:33 AM yeaaahhhh... sliiiiiight problem.... um....... don't know where to have one made nor do i know how. 3" hole saw cut out plexi or wood then cut the size tweet into the middle of that ... use the factory grills over them ... ! Title: Re: Front Dashboard Speakers Post by: Nykon on December 09, 2006, 06:06:34 AM LOL, Shiano, do you need a picture?
Title: Re: Front Dashboard Speakers Post by: turboavenger98 on December 09, 2006, 06:39:45 AM sorry didnt meen to confuse you.
Title: Re: Front Dashboard Speakers Post by: Shiano on December 09, 2006, 08:30:25 AM actually, i'm a visual learner. show me how it works and i can start showing you how to make it better! ;D ;D ;D
Title: Re: Front Dashboard Speakers Post by: turboavenger98 on December 10, 2006, 02:26:14 AM if you can teach me then be my guest 8) but good luck cause theres not much about audio systems i dont know
Title: Re: Front Dashboard Speakers Post by: Shiano on December 10, 2006, 08:44:50 AM gotta show me first. lol
Title: Re: Front Dashboard Speakers Post by: SoBeGod00 on January 30, 2007, 12:31:00 AM Here is how I did mine. Check it out.
http://asog.net/component/option,com_smf/Itemid,30/topic,2242.msg22403#msg22403 (http://asog.net/component/option,com_smf/Itemid,30/topic,2242.msg22403#msg22403)
ASOG Forums | Powered by SMF 1.1 RC1.
© 2001-2005, Lewis Media. All Rights Reserved. Joomla Bridge by JoomlaHacks.com |